Heating Systems for Homes and Businesses
When your heating breaks down or no longer suits the property, we assess the fault, heat loss and existing system before recommending repair, boiler replacement or air source heat pump installation. You receive a clear quotation and practical next steps.
Signs Your Heating System Needs Attention
Cold rooms, uneven radiators, unusual noises, falling pressure or a boiler water leak can point to a heating problem. If energy costs are rising without a clear change in use, we trace the cause and explain what needs attention.
The boiler needs repeated resets
If the boiler keeps locking out or needs restarting, the fault may be with its controls, pump or combustion. We test the system and explain whether repair remains sensible.
Hot water is unreliable
Hot water that turns cold, takes too long to arrive or runs out quickly can point to a control, cylinder or boiler problem. We check the equipment and its capacity for the household.
The thermostat no longer controls the temperature
A home that overheats or stays cold despite changing the thermostat may have a control or wiring fault. We check the controls alongside the heating system, rather than replacing parts at random.
The boiler is becoming difficult to maintain
An ageing boiler with obsolete parts can become harder to repair and less suitable for the property. We assess its condition and compare repair with replacement before work starts.
The heating system no longer suits the property
An extension, converted room or change in how the building is used can leave the boiler or radiators incorrectly sized. We review heat loss, radiator output and pipework before recommending changes.
An oil or LPG system is nearing replacement
Off-gas-grid homes often rely on oil or LPG heating, and replacement needs to account for the fuel system as well as the boiler. Our OFTEC-registered engineers assess the installation and set out the practical options.
Choosing the Right Heating System
Your heating choice depends on the property, available fuel and how much of the existing system can be reused. We assess the boiler, radiators, pipework, insulation, hot-water demand and available space before comparing a replacement boiler with an air source heat pump or other electric heating system.
Controls can improve comfort without replacing the whole system, while future plans may affect the best route now. If you are considering solar panels, battery storage or moving away from oil or LPG, we explain how the heating system could work alongside those changes and what installation work each option involves.
Gas boiler replacement
A gas boiler can remain the sensible choice when the existing radiators, pipework and gas supply are suitable. A modern replacement may address repeated faults without changing the whole heating system.
What we check before replacing a gas boiler
Your boiler may be failing because of its age, poor water circulation, controls or a problem elsewhere in the system. We check the flue, ventilation, condensate route, gas supply, radiators and hot-water requirements before recommending a replacement. Gas Safe registration means our engineers meet the legal requirement for work on gas boilers. We explain which existing components can stay and identify any pipework or control changes needed before work begins.
Oil and LPG heating
Oil and LPG remain important options for homes and businesses away from the gas grid. The right choice depends on fuel storage, boiler condition, system layout and the property’s longer-term heating plans.
Heating an off-gas-grid property
Your oil or LPG boiler may be serviceable even when the heating system needs improvement, so replacement is not always the first step. We inspect the boiler, tank or cylinder arrangements, flue, controls, radiators and pipework to find the practical route forward. OFTEC registration covers work on oil-fired systems, which matters when an older rural property depends on oil heating. If you are considering an air source heat pump, we compare the changes to the system, hot water and electrical supply before you commit.
Air source heat pumps
An air source heat pump takes heat from outside air and uses electricity to warm the home and hot water. It can suit some older properties, but the building and heating system must be checked rather than assumed suitable.
What a heat pump assessment covers
Your heat pump needs correctly sized radiators, suitable pipework, space for the outdoor unit and a workable hot-water arrangement. We assess heat loss room by room and consider insulation, noise, planning constraints and the position of the cylinder and outdoor unit. Some radiators or pipework may need changing, particularly in older solid-wall homes or barn conversions. Our MCS certification allows us to make a Boiler Upgrade Scheme grant application on your behalf when the installation meets the scheme rules.
Controls and hot water
Poor control can make a sound heating system feel uncomfortable and waste energy. Changing the programmer, thermostat, valves or hot-water controls may improve how the system responds without replacing the boiler.
Making the existing system easier to manage
Your rooms may heat unevenly because of thermostat position, stuck valves, poor balancing or controls that do not match the way you use the property. We trace the cause before suggesting new controls. We can also review hot-water cylinders, timers and heating zones where the system serves different parts of a home, building or commercial property. The work is planned around the existing pipework, wiring and heat source, so you know what changes are necessary.
Heating alongside solar and batteries
Future energy plans can change which heating system makes sense today. Solar panels and battery storage may affect how you use electricity, but they do not remove the need for correct heat-loss calculations and system design.
Planning the whole energy system
Your planned solar PV, battery or electric vehicle charger may increase the value of a coordinated electrical and heating design. We consider the available electrical capacity, consumer unit, hot-water demand and likely heating load before separate installations create extra work. MCS-certified installation supports an application for the Smart Export Guarantee where the export requirements are met. We set out the work in stages when a full heating change is not yet practical, so the next upgrade does not conflict with the existing system.
An older home does not automatically rule out an air source heat pump. If the fabric, emitters or available space make it unsuitable, we’ll explain why and recommend a more practical route instead.
When a heat pump is appropriate, our MCS certification means we can apply for the Boiler Upgrade Scheme grant on your behalf. We’ll check the current eligibility requirements and set out the installation work, running-cost assumptions and any effect on the property before you decide.
Heating Repairs, Replacements and Low-Carbon Upgrades
A failed boiler needs a clear next step; an older system needs careful planning. We help diagnose faults, compare replacement routes, prepare heating upgrades for rented properties and assess lower-carbon options against the building and budget.
When the heating stops
A failed boiler does not always need replacing. We test the fault, check safe operation and explain whether a repair is sensible or replacement is the better route.
Older and off-gas-grid homes
Oil, LPG, solid-wall and barn-conversion properties need careful system planning. Our OFTEC-registered engineers assess the existing fuel system, flue and hot-water setup before recommending changes.
Heating for rented properties
Landlords and property managers need safe systems and clear records. We plan heating work around the property, complete the required checks and provide the paperwork needed for compliance.
Replacing an ageing boiler
An older boiler can affect comfort, hot-water demand and running costs. We compare the replacement options with the condition of the pipework, radiators and controls, then provide a written quotation before work starts.
Lower-carbon heating choices
A heat pump may suit some homes but not others. We look at heat loss, radiator output, insulation and available outdoor space, then explain the practical work and costs before you decide.
Qualified Work, Clear Advice and Proper Paperwork
When a heating system needs attention, you receive a written quotation before work starts, with the proposed equipment and installation work explained clearly. Our directly employed engineers complete tidy, compliant work and leave the paperwork ready for your records.