EV Charger Installation & Testing
If you need an EV charger at home or work, we assess the available electrical supply, install the right charging station and test the completed installation. Contact Alderminster Group to discuss your car, parking space and charging routine.
Ready to Charge
When charging is needed at home or work, we check supply, install safely, test fully and explain the controls clearly.
What EV Charger Installation Includes
An EV charger can suit a driveway, garage or workplace parking area, provided the electrical arrangement and cable route work safely. We install single or dual chargers, including a post where wall mounting isn’t practical.
You’ll receive a clear quotation before work starts, followed by tidy work. If an existing charger develops a fault, we can assess the installation and identify the cause.
Home charging planned around parking
Your charger position is planned around where the car parks, how the cable reaches it and how the property is used.
Charging at work
Workplace parking can be assessed for single or dual charging, with the installation arranged around the available supply and parking layout.
Electrical supply checked first
An older installation may need attention before charging equipment is connected, so we check the supply and consumer unit as part of the installation.
Safe installation by qualified electricians
NICEIC and ECA-registered electricians carry out the electrical work, with cables protected and equipment connected for safe everyday use.
Testing before handover
We test the completed circuit and charger, check that the controls operate correctly and explain what you need to use it.
Existing charger faults investigated
If a charger stops working or trips the supply, we inspect the installation, test the relevant parts and identify the cause before recommending the next step.
Testing and Certification for Your EV Charger
Your charging pattern may call for timed charging or load management rather than maximum power at every moment. We configure the controls around your tariff and household demand, then show you how to adjust them without guesswork.
Electrical Supply Assessment
An EV charger can place a sustained load on the electrical installation. We check the consumer unit, earthing, supply capacity and existing demand before recommending a charging rate.
A Charging Point That Fits the Property
Your car, parking position and charging routine determine the right equipment. We help you choose a suitable charger without paying for power your installation cannot use.
Neat Cable Routing
A detached garage, outbuilding or long drive needs careful cable planning. We agree the route with you, protect the cable properly and keep the finished installation tidy.
Safe Installation by Qualified Electricians
Older properties may need electrical improvements before a charger is installed. Our NICEIC-registered electricians identify any remedial work clearly, then install to current safety requirements.
Clear Installation Paperwork
Once the charger is installed, we provide the relevant electrical certification and explain what has been tested. You have a clear record for the property and future reference.
Practical Handover
After testing, we show you how to start and stop a charge, use the app and understand any fault indicators. You can use the charger confidently without working out the controls alone.
Questions About EV Charger Installation and Testing
Where can an EV charger be installed on my property?
Before installation, we inspect the consumer unit, cable route, earthing, parking position and available capacity. We then confirm upgrades needed and include them clearly in the written quotation beforehand.
How do you test an EV charger installation?
After installation, we test protective devices, cable connections, earthing and charger operation with calibrated equipment. We record the results, identify defects, and explain any remedial work before handover to you.
How long does EV charger installation take?
The installation time depends on the charger, cable route, access and electrical upgrades. We confirm the expected duration beforehand and explain any changes before any extra work starts.
Can you install a dual EV charger at my property?
If two vehicles need charging, we assess simultaneous demand, cable routes and controls before quoting. We then install a dual unit only where the electrical design supports both vehicles safely.
Does my EV charger installation need planning permission?
Many EV charger installations fall under permitted development, but listed buildings, conservation areas and unusual mounting arrangements may need approval. We check relevant restrictions and explain any application before work.
What to Expect from Your EV Charger Installation
If the cable route is long, the consumer unit has limited capacity or the parking space is away from the house, we identify that before recommending an EV charger. You receive a written quotation covering the agreed work, any protective equipment and possible access requirements, so there are no surprise charges.
On the installation day, we protect the working area, keep cable routes neat and explain any changes before carrying them out. We inspect the finished circuit with suitable EV testing equipment and give you the results and paperwork needed for future reference.
Who carries out the installation?
Your charger is connected to the fixed wiring in your property, so the electrician’s experience and registration matter. We use directly employed electricians rather than subcontractors.
Electrical work carried out by our own team
Our electricians are NICEIC- and ECA-registered, giving you a properly assessed installation rather than a charger simply fixed to the wall. The same team handles the cabling, protective equipment and final checks, so responsibility stays with Alderminster Group from the first inspection to handover.
Will it suit an older property?
Older homes can have different earthing arrangements, limited consumer-unit space or wiring that needs attention before a charger is connected. We explain any issue that affects the installation before work starts.
The existing electrical system comes first
If the property needs an electrical improvement to support safe EV charging, we separate that work clearly from the charger installation. You can then decide what to include, with the technical reason and cost set out in writing rather than discovering an extra requirement during the job.
What happens if the plan changes?
A route that looks straightforward on paper can change once we inspect the building, driveway or outbuildings. We discuss any necessary change with you before carrying it out.
Agreed work stays clear
If access, building construction or the position of the charging point calls for a different approach, we explain the practical effect and revise the quotation before proceeding. We do not add work without your agreement, so the final bill relates to a decision you have made.
How do we protect your property?
Installing a charger can involve drilling, lifting covers and working between the property and parking space. We plan the route to limit disruption and keep the finished installation tidy.
Neat work with the parking space in mind
We protect the working area, keep dust and equipment under control and route the cable carefully around the building. Once the charger is installed, we remove our materials and leave the property as we found it.
What will you have afterwards?
A charger is easier to use when you know what its settings do and where the installation records are kept. We finish by making both clear.
A clear handover
We explain the charger controls, including any scheduled charging or load-management settings, in straightforward terms. You receive the relevant test results and installation paperwork, giving you a record of the work if the property or vehicle changes later.
The next step is to tell us where the car is parked and how you expect to charge it. We’ll use that information to confirm the practical installation plan before any work begins.
If the existing electrical arrangement or cable route makes your first choice unsuitable, we’ll explain the alternatives clearly. You can then decide on the charger and installation with the likely work understood in advance.