Panasonic RAC Solo Air Conditioning
Panasonic RAC Solo provides home heating and cooling without a conventional outdoor unit. Fully installed prices start from £2,500, with suitable systems typically installed in one day following a free, no-obligation home survey.
Would Panasonic RAC Solo suit your home?
RAC Solo is a wall-mounted air-conditioning system designed for rooms where a conventional outdoor unit may be impractical or visually intrusive. The complete system sits inside the property, with two circular openings through an external wall allowing it to exchange air with the outside.
We assess the room size, insulation, glazing, heat gain and intended use before recommending a suitable capacity. Alderminster installs R290 and R32 models in 1.7 kW, 2 kW, 2.5 kW and 3 kW capacities, with each supplied system providing both heating and cooling.
Air conditioning without an outdoor unit
Conventional split air conditioning uses an indoor unit connected to equipment outside the property. Panasonic RAC Solo is a self-contained system, so it does not need a separate outdoor condenser or refrigerant connections between indoor and outdoor units. Two discreet external grilles replace the conventional outdoor equipment. Most units require two 162 mm wall openings, while the largest-capacity model requires larger openings. We check the wall construction and proposed position before confirming suitability.
Air conditioning for bedrooms
Bedrooms can become uncomfortable when solar gain, limited ventilation or retained heat keeps the room warm into the evening. We consider the room size, window area, insulation and preferred sleeping temperature before specifying a system. The position of the unit also matters. We plan the installation to distribute conditioned air effectively without placing the airflow unnecessarily close to the bed.
Heating and cooling a home office
Computers, monitors, glazing and limited ventilation can cause a home office to overheat. A correctly sized RAC Solo system can provide controlled cooling without requiring a conventional outdoor unit beside the property. The system can also provide heating during cooler weather. We check the available external wall, electrical supply and equipment position, then explain the installation work before providing a quotation.
Air conditioning for living spaces
A lounge, conservatory or open-plan room may experience significant heat gain through glazing and direct sunlight. The floor area alone does not determine the correct air-conditioning capacity, so we also consider orientation, insulation, occupancy and how the space is used. Larger or connected spaces may need a different solution. We will explain where RAC Solo is appropriate and where another approach should be considered.
Heating and cooling from one system
The Panasonic RAC Solo systems supplied by Alderminster provide both heating and cooling. This allows the same wall-mounted unit to cool the room during warmer weather and provide additional warmth when temperatures fall. We consider the existing heating, room heat loss and intended use before recommending a model. This helps establish how RAC Solo will work alongside the rest of the property’s heating system.
High-level or low-level installation
RAC Solo can be positioned high on a wall or lower near the floor, provided the selected position has suitable access to an external wall. This flexibility can help where furniture, windows or the layout make a conventional position difficult. We assess airflow, wall construction, cable routes and access before agreeing the final position with you.
What the free home survey establishes
The room size, insulation, glazing, external wall and electrical supply all affect the installation. Our free, no-obligation home survey assesses these points, identifies suitable unit positions and establishes the appropriate capacity.
We also check the external appearance and the proposed positions of the two ventilation grilles. This makes the likely finish, access requirements and installation work clear before you commit.
Following the survey, we provide a written quotation setting out the proposed equipment and installation. Fully installed prices start from £2,500, although the final cost will depend on the model, wall construction, electrical supply and any additional work required.
Home air conditioning advice based on the whole room
An online calculation can overlook important details. A south-facing bedroom with large windows may need a different solution from a similarly sized shaded room, while a home office may gain additional heat from people and electrical equipment.
The construction of the external wall also affects the installation. We check wall thickness, materials, access and the proposed grille positions rather than assuming the unit can be fitted anywhere.
We consider heating and cooling requirements, electrical work, airflow and the appearance of the installation together. Your written quotation will identify the proposed equipment and installation work before the project begins.
What makes a Panasonic RAC Solo installation work properly?
Once the appropriate system has been identified, we plan the unit position, wall openings, electrical connection and external grilles. Straightforward installations can typically be completed in one day, although we will explain if the property or proposed position requires additional work.
After installation, we commission the system, explain its controls and provide the relevant handover information. Your Panasonic RAC Solo system includes a three-year product warranty and our installation work is covered by a one-year workmanship warranty.
The checks behind reliable home air conditioning
Capacity matched to the room
Cooling requirements depend on more than floor area. We consider room size, glazing, insulation, orientation, occupancy and heat-producing equipment before selecting from the available 1.7 kW, 2 kW, 2.5 kW and 3 kW systems.
A suitable external wall
RAC Solo must exchange air directly with the outside. We check that the proposed wall and grille positions are suitable before confirming the installation.
Carefully planned airflow
The unit needs to distribute air effectively without creating an uncomfortable draught. We consider beds, desks, seating and other furniture when agreeing its position.
Appropriate electrical supply
The system needs a suitable electrical connection and means of isolation. We assess the existing supply and include any necessary electrical work within the proposed installation.
Discreet external grilles
A conventional outdoor condenser is replaced by two circular wall grilles. We plan their position carefully and explain how the completed installation will look from outside.
Product and workmanship warranties
The RAC Solo system comes with a three-year product warranty. Our installation work is also supported by a one-year workmanship warranty.
R290 or R32 model selection
We consider the room, required capacity and available installation position before recommending an appropriate R290 or R32 Panasonic RAC Solo model.
Commissioning and clear handover
After installation, we commission the system, check its heating and cooling operation and explain the controls. We also provide the relevant warranty and handover information.
Questions to ask before choosing home air conditioning
Is my property suitable for air conditioning without an outdoor unit?
Panasonic RAC Solo needs a suitable perimeter wall so the system can exchange air with the outside. The room, wall construction, grille positions and electrical supply are assessed during your free home survey.
How does Panasonic RAC Solo work without an outdoor unit?
RAC Solo combines the air-conditioning equipment within one indoor unit. Instead of connecting to a separate outdoor condenser, it exchanges air through two openings in the external wall.
How much does Panasonic RAC Solo installation cost?
Fully installed prices start from £2,500. The final cost depends on the required capacity, selected model, wall construction, access, electrical supply and any additional work identified during the home survey.
Does Panasonic RAC Solo provide heating as well as cooling?
Yes. The Panasonic RAC Solo systems supplied by Alderminster provide both heating and cooling, allowing one wall-mounted unit to support year-round room comfort.
Which Panasonic RAC Solo models do you install?
We install R290 and R32 Panasonic RAC Solo systems in 1.7 kW, 2 kW, 2.5 kW and 3 kW capacities. We assess the room before recommending the appropriate model and capacity.
Does Panasonic RAC Solo need refrigerant pipework?
RAC Solo is a self-contained unit and does not require refrigerant connections between separate indoor and outdoor equipment. Electrical work and two openings through the external wall are still required.
Can Panasonic RAC Solo be installed in one day?
A suitable RAC Solo system can typically be installed in one day. The precise timescale depends on the wall construction, unit position, electrical route, access and whether any additional preparation is required.
What warranties are included?
The product is covered by a three-year warranty and Alderminster’s installation work includes a one-year workmanship warranty. The applicable terms will be explained as part of your quotation and handover.
What should my air-conditioning quotation include?
The quotation should identify the proposed unit, capacity, installation position, electrical work, wall openings, external grilles, commissioning, VAT and any assumptions. This makes it easier to compare the complete installation rather than equipment prices alone.
Talk through your home air-conditioning options
Not sure whether Panasonic RAC Solo is suitable for your bedroom, home office or living space? Arrange a free, no-obligation home survey with our local team.
We will assess the room, external wall, electrical supply and installation options before recommending an appropriate R290 or R32 system. Fully installed prices start from £2,500, with suitable systems typically installed in one day.